Last updated 08NOV2020 (see Changelog for details)
If you a running the stock firmware that comes with the RG351P, or the updated 3.7 version that I recommend in my Firmware Guide, you’re in luck — Anbernic just released an update patch to this firmware that provides some serious improvement to PlayStation Portable (PSP) performance. It’s still far from perfect, but it definitely makes more games playable.
One nice thing about this update is that it doesn’t require you to reinstall any new firmware. In fact, all you have to do is replace a couple files on your SD card and you’re all set. No need for WiFi FTP, either!
Table of Contents: What changes are in this update Download the updated SYSTEM file Install the SYSTEM file PSP configuration tips PSP games that perform well on the RG351P Notes Changelog
What changes are in this update
There are a few changes in this firmware update, but Anbernic didn’t tell anyone what they are. Luckily, someone was able to find the difference in the firmware images, which included changes to the PSP emulator and some updates to RetroArch. Here are the actual changes:
Binary files ../../../3.7/target/SYSTEM.squashfs/usr/bin/PPSSPPSDL and ./usr/bin/PPSSPPSDL differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/bin/retroarch and ./usr/bin/retroarch differ diff -rupN ../../../3.7/target/SYSTEM.squashfs/usr/cache/shadow ./usr/cache/shadow diff -rupN ../../../3.7/target/SYSTEM.squashfs/usr/lib/libevdev.lai ./usr/lib/libevdev.lai Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/libevdev-names.o and ./usr/lib/libevdev-names.o differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/libevdev.o and ./usr/lib/libevdev.o differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/libevdev.so and ./usr/lib/libevdev.so differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/libevdev.so.2 and ./usr/lib/libevdev.so.2 differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/libevdev.so.2.3.0 and ./usr/lib/libevdev.so.2.3.0 differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/libevdev-uinput.o and ./usr/lib/libevdev-uinput.o differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/libgo2.so and ./usr/lib/libgo2.so differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/librga.so.2 and ./usr/lib/librga.so.2 differ Binary files ../../../3.7/target/SYSTEM.squashfs/usr/lib/librga.so.2.0.0 and ./usr/lib/librga.so.2.0.0 differ
Download the updated SYSTEM file
To get started, you need to download this zip file, which contains the updated SYSTEM files. It’s about 475MB, so it might take a while.
As this file downloads, let’s make a backup of your SYSTEM files just in case something goes wrong. Remove the SD card from your device, and plug it into your computer using an SD card reader. There should be two partitions that appear: EMUELEC and GAMES. Go into the EMUELEC folder and find the files named SYSTEM and SYSTEM.md5. Grab those files and drag them onto your computer for safe keeping.
Install the SYSTEM file
Installing this update couldn’t be easier. Unzip the update file; inside you should find files named SYSTEM, SYSTEM.md5, and SYSTEM.sha256. Next, on the EMUELEC partition of your SD card, delete the SYSTEM and SYSTEM.md5 files (also empty your trash/recycle bin to make sure you free up space on your SD card). Now just drag the new SYSTEM, SYSTEM.md5, and SYSTEM.sha256 files onto your SD card.
Plug the SD card back into your device and you’re ready to go.
PSP configuration tips
This firmware patch results in improved PSP performance, but it’s also a good idea to make sure your settings are configured for optimal performance. According to Anbernic, these settings will get you the best PSP performance. I also recommend that you tinker with the settings yourself to see if you find one that works better for you and your particular game(s).
To access the PSP menu, press L3 + R3 at the same time.
System settings: Fast memory (unstable): YES Ignore bad memory accesses: NO I/O on thread (experimental): YES I/O timing method: Fast Force real clock sync: NO Change emulated PSP's CPU clock: 333 Rewind snapshot frequency: OFF Memory stick inserted: YES PSP mode: PSP-1000 Graphics settings: Backend: OpenGL Mode: Buffered rendering Simulate block transfer effects: YES Software rendering: NO Frame skipping: 1 Frame skipping type: Number of frames Auto frameskip: YES Alternative speed: Unlimited Alternative speed 2: Disabled Postprocessing shader: OFF Fullscreen: YES Rendering resolution: Auto (1:1) VSync: YES Buffer graphics commands: up to 2 Hardware transform: YES Software skinning: YES Vertex cache: YES Clear framebuffers on first use: NO Lazy texture caching: YES Retain changed textures: NO Disable slower effects: YES Spline/Bezier curves quality: LOW Upscale level: OFF Upscale type: Hybrid + Bicubic Deposterize: NO Anisotropic filtering: OFF Texture filtering: AUTO Screen scaling filter: Linear Lower resolution for effects: Balanced
Other users have reported that these Graphics settings work well with the updated PSP emulator as well, so I encourage you to test these on your favorite game(s) as well. Personally, I have noticed that some games work really well with these settings, while others perform poorly. For example, Daxter runs smoothly with the settings below, but the floor becomes a solid black mass, making it an unenjoyable experience. Ratchet and Clank: Size Matters similarly plays smoothly, but will often glitch into a full black screen for a few seconds during gameplay.
Rendering Mode: Backend: OpenGL Mode: Skip buffer effects Simulate block transfer effects: YES Software rendering: NO Framerate Control: Frame skipping: OFF Auto frameskip: NO System settings: Change emulated PSP's CPU clock: 222
If you find a specific configuration that works best for a particular game, go into the PPSSPP menu (L3 + R3) and select “Create game config” to save those settings specifically for that game.
If you’re looking for game-specific configurations, also check out this GitHub page with tips for several PSP games.
PSP games that perform well on the RG351
There are quite a few games that work really well on the device. Here is a short list — if you have other games you’ve found that work well, please leave a comment below and I’ll get them added to the list!
- The 3rd Birthday (Parasite Eve 3)
- Crisis Core Final Fantasy 7
- Dragon Ball Z: Shin Budokai
- Half-Minute Hero
- Kingdom Hearts: Birth by Sleep
- Pipe Mania
- Ridge Racer
- The Sims 2
- Virtua Tennis: World Tour
- This update patch is technically in BETA status, so use it at your own risk. I have seen zero issues with the firmware myself, nor have I read anything about any issues for anyone else.
- If something does go wrong, simply remove the new SYSTEM and SYSTEM.md5 files from your SD card, and then place your old files back where they were.
- This firmware patch only speeds up performance on the standalone PSP emulator (which is set by default); the RetroArch PSP core actually seems to have WORSE performance than before.
- The original beta file that Anbernic shared (which you can find here) had a bug where it wouldn’t let you input the FTP WiFi password (“emuelec”) at all, thus breaking that feature. Luckily someone on Discord fixed the issue, which is why I’m linking to the file above in my guide.
– added GitHub page with game-specific tips
– published guide
– added list of games that work well with RG351P
– added alternative PSP config settings
7 thoughts on “RG351P 3.7 Firmware Update – Improved PSP Performance!”
which is why I’m linking to this other file in my
This goes to the main fiirmware update not the fix,
Hi, the fix is a full firmware update, it was written into the SYSTEM file. The best way to think of it is the Anbernic (broken) version is on Google Drive, while the fix is on ufile.io. Hope that helps!
Not sure if info is outdated due to new firmware, but to access PSP menu, you need to now press L2 + R2 (not L3 + R3)
Just tried Blazblue Calamity Trigger and that seemed to run smoothly when playing. Couple of frame drops but nothing huge.
Does this update make the RG351P the go-to retro handheld to emulate PSP games, or there are better options out there?
I installed the update and it worked one time. Now it trys to boot and stops at the point ‘uzebox’. Does somebody know how i can solve this problem?
it’s not available anymore at https://ufile.io/n7su1p5i 😦
can anybody upload it ?